The kind of vehicle normally found inside factories, warehouses and other work locations where moving heavy materials from one location to another is required is referred to as a forklift. The mast is the mechanism situated on the front of the forklift that hydraulically lowers and lifts the load. The "cat" is the area which is protected where the operator of the forklift sits.
Forklifts are capable of lifting loads between one and five tons in weight. Some models could be used to raise shipping containers and much heavier loads.
The tires of a forklift must be checked and maintained regularly. The types of tires on different forklifts differ according to factors like for instance frequency of use, load weights and ground surfaces. Every operator of a forklift should have access to tire press, replacement tires and a forklift jack.
Tire Maintenance Instructions
You must frequently check the tires. Watch for signs of wear and damage to the tires. If the wear on the tire exceeds 40%, it should be replaced.
When purchasing tires, ensure that you are purchasing the right kind - polyurethane, solid or pneumatic.
When you have to replace the tires, the forklift jack must be positioned under the tire. You can easily change the tires if you raise the forklift high enough.
You can use the tire press to pull the tire from the rim and remove the damaged tire. Install the new tire and secure it properly. If you are changing more than one tire and you have just one jack, lower the forklift, then reposition the jack at the next tire.
On-site tire repair could be performed by a repair company. If the tire is extremely big for both in-house and mobile tire presses, the damaged tire must be transported to a shop which has a stationary tire press.